AdBlue-nu proqramla idarə edin —
avadanlıq hansı brend olursa olsun

AdBlue avtomatlaşdırması, AdBlue çən və doldurma nöqtələrini mərkəzdən izləyib idarə edən proqramdır. Çən səviyyəsini, temperaturunu və doldurma tarixçəsini 7/24 izləyir; doldurma və satışı ölçülü qeydə alır, bitən çənlərə sevkiyyatı əvvəlcədən planlaşdırır. Sahədəki nasos və dispenserlərlə brenddən asılı olmayaraq əlaqə saxlayır.

AdBlue istehsalçısı bütün doldurma nöqtələrini, yanacaq distribütoru müqavilə bağlanmış stansiya şəbəkəsini, stansiya sahibi öz stansiyalarını tək paneldən izləyir. Hər rol öz əhatə dairəsindəki çən səviyyəsini, doldurma və satışı görür.

Bəli. Sahədəki mövcud nasos, dispenser və sayğaclarla brend fərq etmədən işləyir (RS485/Modbus, puls, 4-20 mA). Siyahıda olmayan avadanlıq tez sistemə əlavə edilir; öz istehsal etdiyimiz RK3568 əsaslı sahə platası ilə də dəstəklənir.

CX Central monitors the tank level at every station and lists the ones that need replenishment. The route starts from the nearest production site or supply depot, the stops are put in order, and distance is computed over the real road network rather than as the crow flies. In the mobile app the driver sees the day's list with the stop order, litres and a critical badge; entering the litres delivered per tank creates the refill document automatically and the requirement drops from the central dashboard immediately. The tanker does not leave half empty, and an empty station is not skipped.

Litres sold are continuously compared with the level in the tank. The gap between expected consumption and the measured level is reported as loss or shrinkage, with temperature correction taken into account. The calculation runs in the application with traceable formulas — AI does not produce that number, it only interprets the deviation and writes the reasoning. If an operator is going to dispatch a tanker on the strength of a number, where that number came from has to be visible.

The unit can run on tokens, cards or contactless payment and connects to the station's existing payment infrastructure. At the moment of sale, which unit, which product and how many litres are recorded and appear on the central dashboard. Sales and payment are reconciled in a separate audit step, and any difference is reported.

All three are defined separately in the same system and each tier sees only its own data. The producer follows production and dispatch, the distributor the stations in its region, the station its own tank. Revenue sharing is calculated from the contract, and the entitlement is reported as accrued, paid and unpaid.

It monitors the level and the sales of your AdBlue tanks in the field from one place. Because you see in advance when a tank will run dry, the delivery tanker never leaves on a wasted trip; the route is planned from the projected fill levels. The real gain is not in the hardware, it is in the software doing that planning.

In most cases yes: pulse and 4-20 mA current-loop outputs, OPC UA and third-party ATG probes are supported, and it runs with domestic, imported and mixed-brand dispensers. Support for a pump that is not yet on the list is added quickly.

Optional. The field board and the unit can be produced by ELPO; the unit runs on a board with a Rockchip RK3568 processor (4× Cortex-A55) and an AI accelerator. If you prefer to source the hardware yourself, the software connects to your existing equipment.

An AdBlue tank (an IBC cabin or a fixed tank), a pump/dispenser with a meter that delivers measured volumes into the vehicle, token, card or contactless payment, and a probe that measures the tank level. What turns these into a business is the software: it tracks the level, records every refill in litres, compares sales with stock and plans replenishment before a tank runs dry. It can be installed at a fuel station, a construction site, a fleet depot or an agricultural or industrial site; whatever the brand of your existing pump, ELPO software connects to it.

An AdBlue pump (dispenser) transfers AdBlue from the tank into the vehicle's AdBlue tank in measured volumes; its meter counts the litres delivered. For the station, the real value is turning those litres into records: ELPO software reads every refill from the pump's pulse or 4-20 mA output, posts it to sales and stock, and compares it with the tank level to report any difference.

On diesel vehicles with an SCR exhaust system, this warning means the AdBlue tank is running low. If it is ignored, most vehicles will not allow the engine to restart until the tank is refilled; the threshold and behaviour depend on the manufacturer, so check the owner's manual. Refilling is done at a station with an AdBlue pump or from a canister. For a station operator it means the AdBlue tank must never run empty; ELPO software flags a tank reaching a critical level in advance.